GeoVision GV-IPCAM User Manual page 239

Wide Dynamic Range: adjusts and generates clear live view when the
scene contains very bright and very dark areas at the same time. Select
Auto (Strong) to bring out details in the darks areas of the scene,
select Auto (Weak) to bring out less detail in the dark area and at the
same time keep the bright areas from overexposure, or select Auto
(Normal) for a balanced effect. Select Close to disable the function.
Defog: Select Auto to automatically enhance the visibility of images.
Select Close to disable the function.
Zoom: Click the Zoom In
apparent distance of the scene.
Focus Change: Click the Focus In
adjust the focus. To focus automatically, click the Auto Focus
button.
Focus Mode: Select Normal Scan, Regional Scan or Full Scan and
then click the Start
The Normal Scan mode focuses the camera the fastest. The Regional
Scan mode focuses the area selected on the live view. The Full Scan
mode performs a detailed checkup and applies the best focus.
Day Night Focus: Sets the focus type for each D/N mode. Select a
D/N mode and select Auto or Manual for Day Night Focus. Select
Auto to automatically focus the camera when it switches between day
mode and night mode. Select Manual to set a focus value using the
Focus In
be applied each time the camera is in the selected D/N mode.
[GPS] For details, see 16.8.2 GPS Map Settings.
[Download] Allows you to install the programs from the hard drive.
Note:
1. GV-PTZ010D only contains the Gamma feature.
2. Saturation is not available in GV-PTZ010D.
3. Tungsten Lamp is only available in GV-PT110D.
button to automatically adjust the camera focus.
and Focus Out
15
and Zoom Out
and Focus Out
buttons. This manually set focus will
Accessing the Camera
buttons to adjust the
buttons to
213