GeoVision GV-IPCAM User Manual page 270

1. Select the desired sensitivity by moving the slider. There are ten
values. The higher the value, the more sensitive the camera is to
motion.
2. Drag an area on the image. Click Add when you are prompted to
confirm the setting.
3. To create several areas with different sensitivity values, repeat steps
1 and 2.
4. Click Save to save the above settings.
5. Click Reset to delete all the selected areas.
6. If you want to detect motion using the PIR sensor (for Advanced
Cube Camera only), select Use PIR to detect motion.
7. If you want to ignore environmental changes such as rain or snow,
select Ignore environmental changes.
8. If you want to ignore video noise when light changes, select Noise
Tolerance.
9. If you want to trigger the alarm output when motion is detected, select
Output 1 and click the Apply button. To activate the output settings,
you must also start Input monitoring manually or by schedule. For
related settings, see 16.4 Monitoring.
244