High Capacity Input Tray (Hcit) Tray Lift Drive Motor Assembly Removal - Lexmark T652 Service Manual

High capacity input tray (HCIT) tray lift drive motor assembly removal

Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.
1
Remove the HCIT cover, right. Go to
2
Remove the HCIT cover, left. Go to
3
Disconnect the HCIT tray lift drive motor cable connector from the HCIT controller card assembly.
Note: Remove the cable from the restraint, and observe the routing for reinstallation.
4
Remove the eight screws (A) securing the HCIT tray lift drive motor assembly.
A
5
Remove the HCIT tray lift drive motor assembly.
"High capacity input tray (HCIT) cover, right removal" on page
"High capacity input tray (HCIT) cover, left removal" on page
Repair information
382
4062
376.
378.
A