Sheet Dual Input (Ttm)—Tray Support Roll Removal - Lexmark C935 Service Manual

7. Remove the caster (A).
2000-sheet dual input (TTM)—tray support roll removal
1. Remove the tray module left cover. See
page 4-123.
2. Remove media tray 3 assembly. See
on page 4-128.
3. Remove media tray 4 assembly. See
on page 4-127.
4. Remove the foot cover. See
5. Remove the two screws securing the two brackets (A).
6. Remove the two E-clips securing the tray support rolls (B) to the two brackets (A) using a prying tool.
7. Remove the two E-clips securing the tray support rolls (B) to the main frame (C).
"2000-sheet dual input (TTM)— tray module left cover removal" on
"2000-sheet dual input (TTM)—TTM media tray 3 assembly removal"
"2000-sheet dual input (TTM)—TTM media tray 4 assembly removal"
"2000-sheet dual input (TTM)—foot cover removal" on page
Front
B
D
E-clip
A
5057-XXX
4-122.
4-125
Repair information
Previous
Next
Go Back