Sensor (5-bin mailbox media bin empty) removal
1
Remove the 5-bin mailbox left outer cover. Go to
2
Release the connecting tabs on the sensor (media bin empty) and remove from its bracket.
3
Disconnect the harness from the sensor (media bin empty).
5-bin mailbox controller card assembly removal
1
Remove the 5-bin mailbox left outer cover. Go to
2
Disconnect all the harnesses from the 5-bin mailbox controller card assembly.
"5-bin mailbox left outer cover removal" on page
"5-bin mailbox left outer cover removal" on page
Repair information
350
4062
344.
344.