Index Sensor Removal; Toner Density Sensor Removal - Lexmark MS510 Service Manual

Index sensor removal

1
Remove the left cover. See
2
Remove the right cover. See
3
Remove the rear door and cover. See
4
Remove the power supply. See
5
Remove the power supply shield. See
6
Remove the duplex. See
7
Disconnect the cable JINDEX1 from the system board.
8
Remove the screw (A).
9
Route off the cable, and then remove the index sensor.

Toner density sensor removal

1
Remove the left cover. See
2
Remove the main drive gearbox. See
3
Remove the rear door and cover. See
4
Remove the power supply. See
5
Remove the power supply shield. See
"Left cover removal" on page
"Right cover removal" on page
"Rear door and cover removal" on page
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
A
"Left cover removal" on page
"Main drive gearbox removal" on page
"Rear door and cover removal" on page
"Power supply removal" on page
"Power supply shield removal" on page
Repair information
181.
194.
240.
242.
181.
240.
246
257.
241.
182.
257.
241.
4514-6xx