Mac Address-Table Multicast Forbidden Address - Dell Networking 2024 Reference Manual

console(config)#mac address-table aging-time 400

mac address-table multicast forbidden address

Use the mac address-table multicast forbidden address command in Global
Configuration mode to forbid adding a specific Multicast address to specific
ports. To return to the system default, use the no form of this command. If
routers exist on the VLAN, do not change the unregistered multicast
addresses state to
Syntax
mac address-table multicast forbidden address vlan
address ip-multicast-address
|
port-channel | tengigabitethernet | fortygigabitethernet}
no mac address-table multicast forbidden address vlan
multicast-address
• —
add
Adds ports to the group. If no option is specified, this is the default
option.
• —
remove
• vlan-id —
vlan
• mac-multicast-address —MAC Multicast address
xxxx.xxxx.xxxx.
• ip-multicast-address —
• interface-list —
interfaces, or a combination of both. Interfaces can be port-channel numbers or
physical ports in unit/slot/port format.
Default Configuration
No forbidden addresses are defined.
Command Mode
Global Configuration mode
User Guidelines
Before defining forbidden ports, ensure that the Multicast group is registered.
282
Address Table Commands
drop
on the routers ports.
} {add | remove} interface {gigabitethernet |
ip-multicast-address
|
Removes ports from the group.
A valid vlan-id. (Range 1-4093)
IP Multicast address.
Specify a comma separated list of interfaces, a range of
vlan-id
vlan-id
}
in the format
mac-multicast-
{
interface-list
mac-
{