Syntax
enable authentication {default |
no enable authentication
•
default — Uses the default list created with the aaa authentication enable
command.
list-name — Uses the indicated list created with the aaa authentication
•
enable command. (Range: 1-12 characters)
Default Configuration
Uses the default set with the command aaa authentication enable.
Command Mode
Line Configuration mode
User Guidelines
Use of the no form of the command does not disable authentication. Instead,
it sets the authentication list to the default list (same as enable
authentication default).
Example
The following example specifies the default authentication method when
accessing a higher privilege level console.
console(config)# line console
console(config-line)# enable authentication default
enable password
Use the enable password command in Global Configuration mode to set a
local password to control access to the privileged EXEC mode. To remove the
password requirement, use the no form of this command.
Syntax
enable password
no enable password
password
[encrypted]
list-name
}
AAA Commands
231