Routing Information Protocol - Dell Networking 2024 Reference Manual

Routing Information Protocol

Command
auto-summary
default-information
originate (Router RIP
Configuration)
default-metric
distance rip
distribute-list out
enable
hostroutesaccept
ip rip
ip rip authentication
ip rip receive version
ip rip send version
redistribute
router rip
show ip rip
show ip rip interface
show ip rip interface brief
split-horizon
Description
Enables the RIP auto-summarization mode.
Controls the advertisement of default routes.
Sets a default for the metric of distributed
routes.
Sets the route preference value of RIP in the
router.
Specifies the access list to filter routes received
from the source protocol.
Resets the default administrative mode of RIP
in the router (active).
Enables the RIP hostroutesaccept mode.
Enables RIP on a router interface.
Sets the RIP Version 2 Authentication Type and
Key for the specified interface.
Configures the interface to allow RIP control
packets of the specified version(s) to be
received.
Configures the interface to allow RIP control
packets of the specified version to be sent.
Configures OSPF protocol to allow
redistribution of routes from the specified
source protocol/routers.
Enters Router RIP mode.
Displays information relevant to the RIP router. PE
Displays information related to a particular RIP
interface.
Displays general information for each RIP
interface.
Sets the RIP split horizon mode.
Command Groups
a
Mode
RIP
RIP
RIP
RIP
RIP
RIP
RIP
IC
IC
IC
IC
PIP
GC
PE
PE
RIP
153