Dell Networking 2024 Reference Manual page 136

IP Routing
Command
encapsulation
ip address
ip netdirbcast
ip policy route-map
ip route
ip route default
ip route distance
ip routing
match length
match mac-list
route-map
match ip address
set interface null0
set ip default next-hop
set ip next-hop
set ip precedence
show ip brief
Description
Configures the link layer encapsulation type for
the packet.
Configures an IP address on an interface.
nables the forwarding of network-directed
E
broadcasts.
Applies a route map on an interface.
Configures a static route. Use the no form of
the command to delete the static route.
Configures the default route. Use the no form
of the command to delete the default route.
Sets the default distance (preference) for static
routes.
Globally enables IPv4 routing on the router.
Configures packet length matching criteria for a
route map.
Configures MAC ACL match criteria for a route
map.
Creates a policy based route map.
Specify IP address match criteria for a route
map.
Routes packets to interface null 0.
Sets a list of default next-hop IP addresses
to be used if
no explicit route for the packet's
destination address appears in the routing table.
Specifies the adjacent next-hop router in the
path toward the destination to which the
packets should be forwarded.
Sets the IP precedence bits in the IP packet
header.
Displays all the summary information of the IP. PE
Command Groups
a
Mode
IC
IC
IC
IC
GC
GC
GC
GC
RM
RM
GC
RM
RM
RM
RM
RM
136