Dell Networking 2024 Reference Manual page 214

Thank you for using the Dell Easy Setup Wizard. You will now enter CLI mode.
usbMount took 1 milliseconds
Applying Interface configuration, please wait ...
Monitoring Traps from CLI
It is possible to connect to the CLI session and monitor the events or faults
that are being sent as traps from the system. This feature is equivalent to the
alarm-monitoring window in a typical network management system. The user
enables events or monitor traps from the CLI by entering the command
logging console. Traps generated by the system are dumped to all CLI
sessions that have requested monitoring mode to be enabled. The no logging
console command disables trap monitoring for the session. By default,
console logging is enabled.
Viewing System Messages
System messages autonomously display information regarding occurrences
that may affect switch operations. By default, system messages are not
displayed on CLI sessions connected via telnet or SSH. Use the terminal
monitor command to enable the autonomous display of system messages
when connecting to the switch via telnet or SSH. System messages are always
displayed on the serial console.
214
Using the CLI