Utility Commands
Auto-Install
Command
boot auto-copy-sw
boot auto-copy-sw allow-
downgrade
boot host autoreboot
boot host autosave
boot host dhcp
boot host retrycount
show auto-copy-sw
show boot
a.
For the meaning of each Mode abbreviation, see
Captive Portal
Command
authentication timeout
captive-portal
enable
http port
Description
Enables or disables Stack Firmware
Synchronization.
Enables downgrading the firmware version on
the stack member if the firmware version on the
manager is older than the firmware version on
the member.
Enables rebooting the device (no administrative
intervention) when the auto-image is
successfully downloaded.
Enables/disables automatically saving the
downloaded configuration on the switch.
Enables/disables Auto Config on the switch.
Set the number of attempts to download a
configuration.
Displays Stack Firmware Synchronization
configuration status.
Displays the current status of the Auto Config
process.
Mode Types
Description
Configures the authentication timeout.
Enables the captive portal configuration mode. GC
Globally enables captive portal.
Configures an additional HTTP port for captive
portal to monitor.
on page 87.
Command Groups
a
Mode
GC
GC
GC
GC
GC
GC
PE
PE
a
Mode
CP
CPI
CP
156