Layer 3 Commands - Dell Networking 2024 Reference Manual

Command
show dot1x interface
statistics
show dot1x users
clear dot1x
authentication–history
dot1x guest-vlan
dot1x unauth-vlan
show dot1x advanced
a. For the meaning of each Mode abbreviation, see

Layer 3 Commands

ARP (IPv4)
Command
arp
arp cachesize
arp dynamicrenew
arp purge
arp resptime
arp retries
arp timeout
clear arp-cache
Description
Displays 802.1X statistics for the specified
interface.
Displays active 802.1X authenticated users for
the switch.
Clears the authentication history table captured
during successful and unsuccessful
authentication.
Sets the guest VLAN on a port.
Specifies the unauthenticated VLAN on a port. IC
Displays 802.1X advanced features for the
switch or specified interface.
Mode Types
Description
Creates an Address Resolution Protocol (ARP)
entry.
Configures the maximum number of entries in
the ARP cache.
Enables the ARP component to automatically
renew dynamic ARP entries when they age out.
Causes the specified IP address to be removed
from the ARP cache.
Configures the ARP request response timeout.
Configures the ARP count of maximum request
for retries.
Configures the ARP entry age-out time.
Removes all ARP entries of type dynamic from
the ARP cache.
on page 87.
Command Groups
a
Mode
PE
PE
PE
IC
PE
a
Mode
GC
GC
GC
PE
GC
GC
GC
PE
127