Dell Networking 2024 Reference Manual page 169

sFlow
Command
sflow destination
sflow polling
sflow polling (Interface
Mode)
sflow sampling
sflow sampling (Interface
Mode)
show sflow agent
show sflow destination
show sflow polling
show sflow sampling
a. For the meaning of each Mode abbreviation, see
SNMP
Command
show snmp
show snmp engineID
show snmp filters
show snmp group
show snmp user
show snmp views
show trapflags
Description
Configures sFlow collector parameters (owner
string, receiver timeout, ip address, and port).
Enables a new sflow poller instance for the data
source if rcvr_idx is valid.
Enable a new sflow poller instance for this data
source if rcvr_idx is valid.
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
Displays the sflow agent information.
Displays all the configuration information
related to the sFlow receivers.
Displays the sFlow polling instances created on
the switch.
Displays the sFlow sampling instances created
on the switch.
Mode Types
Description
Displays the SNMP status.
Displays the SNMP engine ID.
Displays the configuration of filters.
Displays the configuration of groups.
Displays the configuration of users.
Displays the configuration of views.
Displays SNMP traps globally or displays
specific SNMP traps.
on page 87.
Command Groups
a
Mode
GC
GC
IC
GC
IC
PE
PE
PE
PE
a
Mode
PE
PE
PE
PE
PE
PE
PE
169