Dell Networking 2024 Reference Manual page 141

Command
show interfaces loopback
a. For the meaning of each Mode abbreviation, see
Multicast
Command
ip mcast boundary
ip mroute
ip multicast-routing
ip multicast ttl-threshold
ip pim
ip pim bsr-border
ip pim bsr-candidate
ip pim dense-mode
ip pim dr-priority
ip pim hello-interval
ip pim join-prune-interval
ip pim rp-address
Description
Displays information about configured
loopback interfaces.
Mode Types
Description
Adds an administrative scope multicast
boundary.
Creates a static multicast route for a source
range.
Sets the administrative mode of the IP
multicast forwarder in the router to active.
ttlvalue
Applies a to a routing interface.
Administratively configures PIM mode for IP
multicast routing on a VLAN interface.
Administratively disables bootstrap router
(BSR) messages from being sent or received
through an interface.
Configures the router to advertise itself as a
bootstrap router (BSR).
Administratively configures PIM dense mode
for IP multicast routing.
Administratively configures the advertised
designated router (DR) priority value.
Administratively configures the PIM Hello
messages on the specified interface.
Administratively configures the frequency of
join/prune messages on the specified interface.
Defines the address of a PIM RP for a specific
multicast group range.
on page 87.
Command Groups
a
Mode
PE
a
Mode
IC
GC
GC
IC
IC
IC
GC
GC
IC
IC
IC
GC
141