Dell Networking 2024 Reference Manual page 125

a. For the meaning of each Mode abbreviation, see
802.1x
Command
dot1x dynamic-vlan enable
dot1x initialize
dot1x mac-auth-bypass
dot1x max-req
dot1x max-users
dot1x port-control
dot1x re-authenticate
dot1x reauthentication
dot1x system-auth-control
monitor
dot1x timeout guest-vlan-
period
dot1x timeout quiet-period
dot1x timeout re-authperiod
Mode Types
Description
Enables the capability of creating VLANs
dynamically when a RADIUS-assigned VLAN
does not exist in the switch.
Begins the initialization sequence on the
specified port.
Enables MAB on an interface.
Sets the maximum number of times the switch
sends an EAP-request frame to the client before
restarting the authentication process.
Sets the maximum number of clients supported
on the port when MAC-based 802.1X
authentication is enabled on the port.
Enables manual control of the authorization
state of the port.
Manually initiates a reauthentication of all
802.1x-enabled ports or a specified 802.1X
enabled port.
Enables periodic reauthentication of the client. IC
Enables 802.1X globally.
Sets the number of seconds that the switch
waits before authorizing the client if the client
is a dot1x unaware client.
Sets the number of seconds the switch remains
in the quiet state following a failed
authentication attempt.
Sets the number of seconds between
reauthentication attempts.
on page 87.
Command Groups
a
Mode
GC
PE
IC
IC
IC
IC
PE
GC
IC
IC
IC
125