Updating The Firmware With The Internet Isw; Outline; Service Environment; Preparations For Firmware Rewriting - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 8.0 Jun. 2008
3.5

Updating the firmware with the Internet ISW

3.5.1

Outline

• [Internet ISW] is the system which gives the instruction for updating the firmware with the
control panel of the main body, so the main body will automatically receive the firmware
from the program server over a network for updating. With the Internet ISW, the firmware
can be updated when the CE is at the user's without firmware data.
3.5.2

Service environment

The following conditions are necessary for using the Internet ISW function.
• The main body is connected to such a network environment that the firmware can be
downloaded on the internet using the ftp or http protocol.
The "Internet ISW" will not operate under the following conditions.
• Main power switch is set to OFF.
• Sub power switch is set to OFF.
• When the following setting is set to "ON":
[Administrator Setting] → [Security Setting] → [Enhanced Security Mode]
• The main body has the job currently performing.
3.5.3

Preparations for firmware rewriting

• For using the Internet ISW, the network parameter, program server address as well as
firewall address need to be set to the main body.
• For details of each setting item, refer to Adjustment/Setting "Internet ISW".
See P.542 of the main body service manual.
A. Internet ISW Set
1. Call the Service Mode to the screen.
2. Touch [Internet ISW Set] which is available from [Internet ISW].
3. Firmware upgrade
A00JF2E583DA
29