Centering (Duplex 2Nd Side) - Konica Minolta bizhub C650 Service Manual

6. Mechanical adjustment
6.1.2

Centering (Duplex 2nd Side)

1. Call the Service Mode to the screen.
See P.434 of the main body service manual.
2. Touch [Machine].
3. Touch [Printer Area].
4. Touch [Centering (Duplex 2nd Side)].
5. Touch [LCT].
6. Press the Start key to let the machine produce a test print.
8. If the measured width B falls outside the specified range, enter the correction value
using the [-] or [+] key.
9. Produce another test print and check to see if width B falls within the specified range.
10. Touch [END].
11. Touch [Exit] on the Service Mode screen.
12. Turn OFF the main power switch. then, wait for 10 sec. or more and turn ON the main
power switch.
36
B
A03NF3C504DA
Field Service Ver. 3.0 May 2007
7. Measure the width of printed refer-
ence line B.
Specification: 3.0 mm ± 2.0 mm
A03NF3E510DA