2. Periodical check
[5]
[2]
[1]
[5]
[1]
18
[3]
[4]
[1]
A07RF2C511DA
A07RF2C044DA
[1]
[3]
[2]
[4]
A07RF2C045DA
Field Service Ver. 7.0 Jun. 2008
12. Remove two screws [1] and remove
the ball bearing mounting plate [2].
13. Rotate and remove the clincher /Rr
[3] and disconnect the connector [4].
NOTE
• Be careful not to lose the ball bear-
ing stopper spring [5] and the ball.
14. Remove both stapler cartridges [1].
15. Remove four screws [1], the screw
[2] that secures the ground wire, the
connector [3] and the clamp [4].
Remove the stapler /Fr [5].