3. Other
[3]
[2]
18
[2]
[1]
A03NF2C025DA
[5]
[1]
[4]
A03NF2C506DA
[1]
A03NF2C048DA
Field Service Ver. 3.0 May 2007
3. Insert the lift wire/S [2] to the right
hole [1] on the rear face.
4. Set the lift wire/L [2] to the near side
groove [1] on the wire pulley, and set
the lift wire/S [4] to the far side
groove [3] and secure them with the
E-ring [5].
NOTE
• They are properly fixed if both
edges of the wire [1] are at the
same position.