Field Service Ver. 8.0 Jun. 2008
14.3 Mechanical adjustment of the bypass tray section
14.3.1
Adjustment of the bypass paper size unit
This adjustment must be made in the following case:
• The bypass paper size unit has been removed.
[1]
[1]
[1]
1. Align one of the six gear ribs [1] with
[2]
[2]
A00JF3C539DA
2. Attach the holder [1] with two screws.
A00JF3C540DA
14. Mechanical adjustment
the match mark [3] on the bypass
guide rack gear [2].
573