Field Service Ver. 3.0 May 2007
Maintenance
2.
Periodical check
2.1
Maintenance procedure (Periodical check parts)
2.1.1
Replacing the pick-up roller
A. Periodically replaced parts/cycle
• Pick-up roller: Every 300,000 prints
B. Replacing procedure
1. Open the upper door.
[2]
[2]
[1]
[1]
A03NF2C001DA
[3]
[1]
A03NF2C002DA
[3]
A03NF2C003DA
2. Periodical check
2. Move the feed roller [1] up.
3. Remove two C-clips [1], the bushing
[2] and remove the feed roller assy
[3].
4. Remove two C-clips [1], the actuator
[2] and remove the pick-up roller [3].
3