Konica Minolta bizhub C650 Service Manual page 618

Field Service Ver. 8.0 Jun. 2008
[1]
[1]
A00JF3C013DA
[1]
A00JF3C014DA
[1] [1]
A00JF3C608DA
14. Mechanical adjustment
5. Remove four screws [1] from the
original glass moving unit.
6. Install four spacers [1] and make a
height adjustment.
NOTE
• Prepare and use the spacers
described below as necessary.
A00J 2903 ##: 0.5 mm thickness
A00J 2908 ##: 0.2 mm thickness
A00J 2909 ##: 0.1 mm thickness
• Each spacer can be identified by
the number of holes [1] which are
1.5 mm in diameter.
565