Fax Settings - Konica Minolta bizhub C650 Service Manual

8. Utility Mode
C. Print XPS Errors
3
• This is displayed only when the function enhanced version 2 or later firmware is installed.
Functions
• To set whether to print error information when an error occurs while printing a XPS
Use
Setting/ • The default setting is Yes.
Procedure
8.6.8

Fax Settings

• Settings are available only when the optional fax kit (FK-502) is mounted.
A. Header Information
Functions • To register the name of the sender and fax ID which will be printed when transmitting
Use • To register or change the name of the sender and fax ID.
Setting/ 1. Touch [Sender] and enter the name of the sender (up to 30 characters) on the on-
Procedure
2. Enter Sender Fax No. (up to 20 characters) using the 10-key pad and [+], [Space]
B. Header/Footer Position
(1) Header Position
Functions • To set the position to print the header when transmitting fax.
Use • To change the position to print the header.
Setting/ • The default setting is Outside Body Text.
Procedure
NOTE
• [Outside Body Text] cannot be selected for Internet Fax/IP Address Fax.
(2) Print Receiver's Name
• It will not be displayed on the screen when [Fax Target] is set to "US" or "HK" in the fol-
lowing settings.
[Service Mode] → [System 1] → [Marketing Area]
Functions • To set whether to print the information of TX destination (Registered name or Fax
Use • To print information of TX destination. (Registered name or Fax No.)
Setting/ • The default setting is OFF.
Procedure
400
3
file.
"Yes"
fax.
screen keyboard.
displayed on the screen.
Inside Body Text
No.) when transmitting fax.
ON
Field Service Ver. 8.0 Jun. 2008
No
"Outside Body Text"
"OFF"
OFF