Konica Minolta bizhub C650 Service Manual page 1309

2. Periodical check
[1]
[2]
[2]
[1]
[3]
12
4. Remove the wire saddle [1] and the
A01GF2C560DA
5. Remove three screws [1] and
NOTE
• Remove the elevator motor assy
while holding the lower part of the
tray [3] with your hand.
[3]
A01GF2C561DA
NOTE
• Before reinstalling the elevator
[2]
motor assy, raise the tray [3] until
the lever [1] attached on the timing
belt moves to the position lower
than that of the sensor [2]. In that
state, reinstall the elevator motor
assy.
[1]
A01GF2C562DA
Field Service Ver. 4.0 Jan. 2008
screw [2]. Remove the ground termi-
nal.
remove the Elevator motor assy [2].