Konica Minolta bizhub C650 Service Manual page 1002

Field Service Ver. 3.0 May 2007
[3]
[1]
[5]
[4]
[1]
[2]
[2]
A03NF2C508DA
A03NF2C030DA
[1]
[3]
A03NF2C031DA
11. Set the lift wire/L [2] to the near side
groove [1] on the wire pulley, and set
the lift wire/S [4] to the far side
groove [3] and secure them with the
E-ring [5].
NOTE
• They are properly fixed if both
edges of the wire [1] are placed at
the same position.
12. Take the edges of the lift wire/S [1]
and the lift wire/L [2] to set them to
the holes on the shaft [3].
3. Other
21