Konica Minolta bizhub C650 Service Manual page 961

7. Mechanical adjustment
9. Touch [Exit] on the Service Mode screen.
10. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
B. Manual adjust: Orig. Feed Zoom Adjustment
50
A01HF3E540DA
[1]
A01HF3C516DA
c
9J07F3C529DA
Field Service Ver. 5.0 Jan. 2008
7. Make sure that result is OK. Then,
touch [SET].
8. Touch [END].
1. Place the chart [1] in the document
feed tray (with the side having an
arrow facing up).
2. Make a full size copy of the chart.
3. Check that the difference in the
widths of c between the chart and
the copy sample falls within the
specified range.
Specifications: 0 ± 1.0 mm
4. If the difference in the width of c falls
outside the specified range, make
the following adjustment.