Konica Minolta bizhub C650 Service Manual page 416

Field Service Ver. 8.0 Jun. 2008
(3) DNS Host
Functions • To set the DNS host name.
• To set whether or not to enable the dynamic DNS setting.
Use • To enter the DNS host name.
• To set the dynamic DNS.
Setting/ <DNS Host Name>
Procedure 1. Touch [DNS Host Name].
2. Enter the DNS host name on the screen key board, and touch [OK].
<Dynamic DNS Settings>
• The default setting is No Limit.
(4) DNS Domain
Functions • To set whether or not to enable the auto obtaining for the DNS domain name.
• To set the DNS default domain name.
• To set the DNS search domain name.
Use • To enter the DNS default domain name.
• To enter the DNS search domain name.
Setting/ <DNS Domain Name Auto Retrieval>
Procedure • The default setting is Enable.
NOTE
• "Enable" cannot be set when [IP Settings] is set to "Auto Input."
<Domain Name>
1. Touch [Default DNS Domain Name] or [DNS Search Domain Name 1 to 3].
2. Enter the domain name using the keyboard on the screen and touch [OK].
(5) DNS Server Settings
Functions • To set whether or not to enable the auto obtaining of the DNS server address.
• To set the priority/substitute DNS server.
Use • To enter priority/substitute DNS server.
Setting/ <DNS Server Auto Obtain>
Procedure • The default setting is Enable.
NOTE
• "Enable" cannot be set when [IP Settings] is set to "Auto Input."
<Priority/substitute DNS server.>
• Touch the corresponding key, and input the server address by IPv4 or the IPv6 for-
mat.
Enable
"Enable"
"Enable"
8. Utility Mode
"No Limit"
No Limit
No Limit
363