Sensor Check; Check Procedure; Sensor Check Screens - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 2.0 Aug. 2007
6.

Sensor Check

6.1

Check procedure

• To allow sensors to be checked for operation easily and safely, data applied to the IC on
the board can be checked on the panel with the main unit in the standby state (including
a misfeed, malfunction, and closure failure condition).
A. Procedure
1. Call the Service Mode to the screen.
See P.434 of the main body service manual.
2. Touch [State confirmation].
3. Touch [Sensor Check].
4. Touch [ ] six times.
6.1.1

Sensor check screens

• These are only typical screens which may be different from what are shown on each indi-
vidual machine.
6. Sensor Check
A07VF3J506DA
19