Konica Minolta bizhub C650 Service Manual page 401

8. Utility Mode
K. Standard Size Setting
• It will be displayed only when the following setting is set to "Level 2."
[Service Mode] → [Enhanced Security] → [Administrator Feature Level]
(1) Original Glass Original Size Detect
Functions • To change the document size detection table.
Use • Use to change the setting for the document size detection table.
Setting/ • The default setting is Table1.
Procedure
(2) Foolscap Size Setting
Functions • To set the size for foolscap paper.
Use • Upon setup.
• To change the size for foolscap paper.
Setting/ • Select the size from among the following five.
Procedure
220 x 330 mm
L. Stamp Settings
(1) Header/Footer Settings
Functions
• Saves or deletes header/footer settings.
• Able to obtain registered header/footer data by [Application] → [Stamp/Composition]
Use
Setting/
• Touch [New] to register new headers and footers.
Procedure
(2) Fax TX Settings
Functions
• Specifies whether to reset a stamp setting when fax is sent.
Use
Setting/ • The default setting is Cancel.
Procedure
M. Blank Page Print Settings
Functions
• Specifies whether to print a stamp/page number on blank pages.
Use
Setting/ • The default setting is Print.
Procedure
348
"Table1"
8 1 / x 13 8 1 /
2 4
"Cancel"
"Print"
Field Service Ver. 8.0 Jun. 2008
Table2
x 13 8 1 / x 13 1 /
8 4
Do Not Cancel
Do Not Print
"8 x 13"