Konica Minolta bizhub C650 Service Manual page 442

Field Service Ver. 8.0 Jun. 2008
K. TCP Socket Settings
(1) TCP Socket
Functions • To set whether or not to set the TCP socket.
• To set the port number for TCP socket transmission.
Use • To use when using the application, etc. for TCP socket transmission.
• To be used when entering the port number used for TCP socket transmission.
Setting/ • The default setting is ON.
Procedure
<Port Number>
1. Touch the Clear key.
2. Enter the port number between 1 and 65535 using the 10-key pad.
(2) TCP Socket (ASCII Mode)
Functions • To set whether or not to set the TCP socket for ASCII mode.
• To set the port number which is used for TCP socket transmission by ASCII mode.
Use • To use when using the application, etc. for TCP socket transmission by ASCII mode.
• To use when entering the port number for TCP socket transmission by ASCII mode.
Setting/ • The default setting is ON.
Procedure
<Port Number (ASCII Mode)>
1. Touch the Clear key.
2. Enter the port number between 1 and 65535 using the 10-key pad.
L. Network Fax Setting
(1) Network Fax Function Settings
• It will not be displayed on the screen when all items are set to "OFF" in the following set-
tings.
[Service Mode] → [System 2] → [Network Fax Settings]
<IP Address Fax Function>
• Setting will be available only when [IP Address Fax] is set to "ON" in the following set-
tings.
[Service Mode] → [System 2] → [Network Fax Settings]
Functions • To set whether or not to use IP address fax function.
Use • To use IP address fax function.
Setting/ • The default setting is OFF.
Procedure
"ON"
"ON"
ON
8. Utility Mode
OFF
OFF
"OFF"
389