Konica Minolta bizhub C650 Service Manual page 622

Field Service Ver. 8.0 Jun. 2008
[1]
14.2.3 Centering adjustment of the tray 1/2
This adjustment must be made in the following case:
• When an image printed on a copy is displaced from the correct position with the
use of the tray1/2.
1. Make a test print and check the amount of misalignment.
2. Pull out the tray where this adjustment is made.
[1]
4. Remove the paper from the tray.
5. Secure the set of paper guides [1] on
A00KF3C513DA
3. Stretch the paper guide [1] to the
A00JF3C002DA
14. Mechanical adjustment
the tray using a screw (M3 x 8 mm:
V121 0308 04).
maximum size position.
569