8. Mechanical adjustment
8.4
Adjusting the mounting position of the paper exit arm
• Conduct this adjustment when there is problem with the paper exit during the stapling
operation.
• Be careful not to let FS fall down when removing FS from the main body
and pulling out the stacker unit from FS. It may cause the injury.
[1]
[1]
[2]
[3]
80
CAUTION
1. Open the front door.
2. Pull out the stacker unit [1].
A07RF2C506DA
3. Remove two screws [1] from the rail
NOTE
• Place something [3] on which the
stacker unit can rest.
[1]
A07RF2C507DA
Field Service Ver. 7.0 Jun. 2008
stopper, and then pull out the stacker
unit [2] further.