Konica Minolta bizhub C650 Service Manual page 623

14. Mechanical adjustment
[1]
14.2.4 Centering adjustment of the tray 3/4
This adjustment must be made in the following case:
• When adjustment in the following screen does not resolve a problem.
[Service Mode] → [Machine] → [Centering]
1. Make a test print and check the amount of misalignment.
2. Pull out the tray where this adjustment is made.
[1]
570
[1]
A00JF3C003DA
[1]
[2]
A00JF3C004DA
A00JF3C005DA
Field Service Ver. 8.0 Jun. 2008
4. Loosen two screws [1].
5. Move the paper guide [1] complete
according to the amount of the mis-
centering you checked in step 1 and
adjust the center position of it.
6. Tighten two screws [2].
7. Make another test print and check
the amount of misalignment.
3. Stretch the paper guide [1] to the
maximum size position.