System 2; Hdd; Image Controller Setting - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 8.0 Jun. 2008

10.9 System 2

10.9.1

HDD

Functions
Use
• Not used.
Setting/
Procedure
10.9.2

Image Controller Setting

Functions • To set the type of the controller.
• [Peripheral Mode] appears when [Others] is selected.
Use • When setting up the controller.
Setting/ Image Controller Setting
Procedure • Select the controller to be used.
"Controller 0"
Controller 1
2
Controller 2
Controller 3
Others
Peripheral Mode
• Select the operating mode of the Scanner.
Mode 1: undefined.
Mode 2: undefined.
Mode 3: undefined.
NOTE
• When the following setting is "ON", this setting should be set to "Controller
0".
[Administrator Settings] → [Security Settings] → [Enhanced Security Mode]
When [Enhanced Security Mode] is set to "ON", this setting cannot be
changed.
• After changing setting, make sure to turn off the main power switch and turn it
on again more than 10 seconds after.
Note on returning the setting from "Controller 1" to "Controller 0".
2
• Selecting "Controller 0" will initialize the following settings made while "Controller 1"
was selected. Reset the following items as necessary when using the internal stan-
dard controller.
<Control panel on the machine>
• Setting items included in [Network Setting] available from [Administrator Setting].
(Except [Status Notification Setting] and [Prefix/Suffix Setting] available from the fol-
lowing setting. [Administrator Settings] → [Network Settings] → [Detail Settings].)
• The following setting
[Administrator Settings] → [User Authentication /Account Track] →[General Settings]
→ [External Server]
• The following setting
[Administrator Settings] → [System Connection] → [IS OpenAPI Setting]
• Mailbox Destination (scan)
• Information on the original specified by the program destination
<Page Scope Web Connection>
• SSL/TLS
: The standard controller is used.
: The optional image controller IC-409 is used.
: undefined.
: undefined.
: undefined.
10. Service Mode
495
2