Pick-Up Roller Load Adjustment - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 3.0 May 2007
6.2

Pick-up roller load adjustment

1
• Incase a no feed jam occurs frequently, perform the pick-up roller load adjustment.
1. Open the upper door.
[2]
5. Reinstall the assist handle that was removed in step 3, securing it with the screw.
6. Reinstall the paper assist plate assy with a new screw (M3 X 10 mm: V118 0310 03).
The screw removed in step 2 (M3 X 8 mm: V116 0308 03) cannot be used to reinstall
the assy.
7. Close the upper door.
8. Perform copying/printing to check whether the no feed or the double feed occurs or not.
[1]
[2]
A03NF3C511DA
[1]
A03NF3C512DA
[1]
A03NF3C513DA
6. Mechanical adjustment
2. Remove the screw (M3 x 8 mm:
V116 0308 03) [1] and remove the
paper assist plate assy [2].
3. Remove the screw [1] and remove
the assist handle [2].
4. Add one more paper assist plate
(A03N 5604 ##) [1] to the original
ones.
NOTE
• Adding only one paper assist plate
is allowed and the total needs to be
up to four.
37
1