Finishing Tray 1 - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 7.0 Jun. 2008
4.3.8

Finishing tray 1

1. Turn ON the main power switch and the power switch of the main body.
[3]
[2]
[1]
[2]
A07RF2C502DA
[4]
[1]
A07RF2C516DA
2. Push up the actuator [1] of the tray1
upper limit sensor with your finger,
and then lower the finishing tray 1
[2].
3. In the state of the finishing tray 1
being lowered, turn OFF the main
and sub power switches.
4. Remove two screws [1] and remove
the finishing tray 1 [2].
NOTE
• To reinstall the finishing tray 1,
align the four fittings [3] with the
corresponding four guide holes [4]
on the finishing tray and fix the tray.
4. Other
29