Field Service Ver. 2.0 May 2008
2.3.15
ZU control board (ZUCB)
1. Remove the Z folding unit.
See P.13
2. Remove the punch unit.
See P.16
[2]
2.3.16
Paper size detect board (PSDTB)
1. Remove the Z folding unit.
See P.13
2. Remove the punch unit.
See P.16
[3]
[2]
[1]
[1]
A07TF2C516DA
[1]
A07TF2C515DA
3. Disconnect all thirteen connectors
from the ZU control board.
4. Remove seven board supports [1],
and remove the ZU control board [2].
3. Remove two screws [1], and discon-
nect the connector [2], and remove
the paper size detect board [3].
2. Other
27