Konica Minolta bizhub C650 Service Manual page 1004

Field Service Ver. 3.0 May 2007
Rear side
[1]
Front side
[2]
A03NF2C035DA
[2]
A03NF2C034DA
[1]
[2]
A03NF2C036DA
15. Wind the wire to the pulley [2] as
rotating the lift up shaft [1] on the
rear face counterclockwise and mov-
ing the tray assy to the upper end.
NOTE
• Wind the wire to the direction
shown by the arrow.
16. When the wire is wound with the tray
assy being at the up end, wind the
auxiliary wire [2] to the wire pulley [1]
clockwise once.
3. Other
23