Konica Minolta bizhub C650 Service Manual page 627

14. Mechanical adjustment
6
[1]
[2]
[2]
[1]
5. After the bypass paper size unit base has been mounted, check that the lever of the
bypass paper size unit moves smoothly in a manner operatively connected to the
bypass guide.
6. Call the Service Mode to the screen and select [Machine] → [Manual Bypass Tray
Adjustment]. Then, carry out manual bypass tray adjustment.
See P.460
574
6
3. Install the bypass unit cover so that
part A (edge) [1] of the rack gear for
[2]
the bypass paper size unit and part
B [2] of the bypass unit cover are
aligned in a straight line.
[1]
A00JF3C541DA
4. Align the mark of the gear [1] with
the mark [2] on the rack gear so that
those gears are engaged.
A00JF3C542DA
Field Service Ver. 8.0 Jun. 2008