Electronics Line CommPact Installation Manual page 72

Hata! Burada görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın. Hata! Burada
10.6.2. Periodic Test Interval
The Periodic Test is a test transmission the system sends to notify the central station that its
reporting capability is fully functional.
Two options are available for the Periodic Test:

You can program the system to send a Periodic Test message according to a chosen
time interval. This time interval can be between 1 and 254 hours (approximately 10
days).

The system calculates automatically the time the Periodic Test is sent according to the
last four digits of the account number. Automatically calculated tests can be sent
daily, weekly or monthly according to the Auto Interval option – see p. 68, 10.6.4 Auto
Interval. This feature is designed to avoid overflow of test reports to the central
station at any given time.
The Periodic Test event message is an unclassified event. This means that it does not belong
to any event group. If the Periodic Test Interval is programmed with any value other than
000, the event message will be sent.
To program the Periodic Test Interval:
1. From the Programming menu, select Communications, Comm. Options, and Test
Interval [95402].
2. Enter the test interval (001‐254 hours) or 255 for an automatically calculated test interval,
then press ʹ√ʹ.
To disable the Periodic Test:

Program the Periodic Test Interval as 000.
10.6.3. First Test
If the Periodic Test Interval is programmed as 001‐254 hours, you must also program the time that
the first Periodic Test is sent.
To program the First Test Time:
1. From the Programming menu, select Communications, Comm. Options, and First Test
[95403].
2. Enter a time (HH:MM), then press ʹ√ʹ.
10.6.4. Auto Interval
The Auto Interval option determines the frequency of automatically calculated periodic test
messages.
To program the Auto Interval:
1. From the Programming menu, select Communications, Comm. Options, and Auto
Interval [95404].
2. Select Daily, Weekly or Monthly.
68
görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın.
CommPact Installation Manual