Lcd Display; Standby Mode - Electronics Line CommPact Installation Manual

Hata! Burada görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın. Hata! Burada
görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın.
3.4.

LCD Display

The LCD display provides you with a detailed interface for operation and programming.
Figure 3-3: Typical Standby Display
3.4.1.

Standby Mode

Standby mode can be defined as the state the system is in when it is disarmed and not in Menu
mode. In Standby mode, the armed status, system status, or banner is displayed. If system status is
normal, the current time is displayed.
Table 3-4: Armed Status
Item...
DISARMED
FULL ARMED
PART ARMED
PERIMETER ARMED
PART ARMED INST
PERIM ARMED INST
FULL ARMING
PART ARMING
PERIMETER ARMING
CommPact Installation Manual
In descriptor editing, used to insert a space before the current
character
In phone number editing, used to enter "T", ",", "P", "+", "*", "#".
In account number editing, used to enter Hexadecimal digits (A-F).
Toggles item descriptors and default names.
In the event log, toggles the time/date stamp.
Toggles AM and PM when setting the time in 12hr format.
In descriptor and phone number editing, used to delete the current
character
 Used to scroll backwards in the current menu level.
For Global Chime and Message Center features, used to access
shortcuts.
 +  (Global Chime shortcut)
 + Χ (Record Message shortcut, front panel keypad only)
 + √ (Play Message shortcut, front panel keypad only)
 Used to scroll forwards in the current menu level.
During standby, used to scroll through the list of system trouble
conditions.
Description...
The system is disarmed.
The system has been armed using the displayed arming method.
The system has been armed using the displayed arming method with the
Instant arm feature activated.
The system is in the process of arming (displayed during exit delay).
15