Electronics Line CommPact Installation Manual page 141

Appendix B: Transmitter Installation
Registering Transmitters to the Repeater
You can register up to eight transmitters to the EL‐2635 repeater.
Figure B- 55: Transmitter Registration Procedure
Figure B- 57: TX List Procedure
Do not register the same transmitter to more than one repeater.
To register transmitters to the repeater:
1. On the LCD programming keypad, press  until 4. TX Register appears on the display.
2. Press ʹ√ʹ; New Device appears on the display.
3. Press ʹ√ʹ again; Transmit 1 appears on the display.
4. Send two transmissions from the device you want to register.
5. When the transmitter number and Save? appears on the display, press ʹ√ʹ to confirm
registration.
The EL‐2635 repeater automatically allocates a transmitter number to each newly registered
device. Write this number and the zone number on the sticker provided with the detector
and stick it inside the transmitterʹs cover for future reference.
6. After you have confirmed registration, the display returns to New Device. Press ʹ√ʹ to
register another device or press Χ to exit Registration mode.
Deleting Registered Transmitters
To delete transmitters from the repeater's register:
1. On the LCD programming keypad, press  until 3. TX Delete appears on the display.
2. Press ʹ√ʹ; the first transmitter in the list appears on the display.
3. Use the arrow navigation keys (5/6) to scroll to the transmitter you want to delete.
4. Press ʹ√ʹ to select the transmitter.
5. Press ʹ√ʹ again for confirmation; the transmitter is deleted.
6. Select another transmitter to delete or press Χ to exit.
CommPact Installation Manual
Figure B- 56: Transmitter Deletion Procedure
Figure B- 58: TX Test Procedure
137