Entry/Exit Timers And System Tones; Entry/Exit Delay; Arm On Exit; Supplementary Entry Delay - Electronics Line CommPact Installation Manual
Hide thumbs
Also See for CommPact:
- User manual (56 pages) ,
- Quick start installation manual (16 pages)
Table of Contents
Advertisement
Hata! Burada görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın. Hata! Burada
görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın.
8.
Entry/Exit Timers and System Tones
This chapter explains how to program the time of the Entry/Exit delays and the tones sounded by
the Built‐In Siren and wireless siren during Exit/Entry Delays, arming, disarming, and when a
trouble condition is present.
8.1.
Entry/Exit Delay
The Entry/Exit delay timers determine the amount of time the user has to arm or disarm the system
before an alarm is activated.
You can program separate Entry and Exit delays for each arming method.
To program Exit delay timers:
1.
From the Programming menu, select Entry/Exit, Exit Delays [921].
2.
Select the Exit delay you want to program: Full [#1], Part [#2] or Perimeter [#3]
3.
Enter a delay time (000‐255 seconds), then press ʹ√ʹ.
To program Entry Delay timers:
1.
From the Programming menu, select Entry/Exit, Entry Delays [922].
2.
Select the Entry Delay you want to program: Full [#1], Part [#2] or Perimeter [#3]
3.
Enter a delay time (000‐255 seconds), then press ʹ√ʹ.
8.2.
Arm on Exit
The Arm on Exit feature cancels the unnecessary remainder of the Exit delay that continues to count
down after the user has vacated the premises. This feature automatically arms the system when an
Entry/Exit zone is closed during the Exit delay.
To program the Arm on Exit option:
1.
From the Programming menu, select Entry/Exit, Arm On Exit [923].
2.
Select Enabled or Disabled.
8.3.
Supplementary Entry Delay
The Supplementary Entry Delay is a pre‐alarm feature that is employed in the event that the system
is not disarmed during the entry delay. When the entry delay expires, the Control System's Built‐In
Siren is sounded during an additional entry delay period. At the end of the supplementary entry
delay, the system generates a full alarm condition; the wireless siren is sounded and an alarm event
is reported to the central station.
To program the Supplementary Entry Delay setting:
1.
From the Programming menu, select Entry/Exit, Supp. Ent. Delay [924].
2.
Select Enabled or Disabled.
CommPact Installation Manual
49
Advertisement
Table of Contents
Need help?
Do you have a question about the CommPact and is the answer not in the manual?
Questions and answers