Electronics Line CommPact Installation Manual page 52

Hata! Burada görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın. Hata! Burada
7.7.3. Siren Cut-Off
The Siren Cut‐Off is the period of time the sirens are activated after an alarm has occurred. You
may program a Siren Cut‐Off time in the interval between ten seconds to twenty minutes.
To program the Siren Cut‐Off time:
1. From the Programming menu, select Devices, Siren, Cut‐Off [9154].
2. Enter a Siren Cut‐Off time MM:SS (00:10 ‐ 20:00), then press ʹ√ʹ.
7.7.4. Wired Siren
When the system generates an audible alarm, both the wired Built‐In Siren and the wireless siren
are sounded. This option allows you to disable the alarm from the Control System's Built‐In Siren.
If disabled, the Control System's built‐in siren may still be used to sound arm/disarm and entry/exit
tones.
To program the Wired Siren option:
1. From the Programming menu, select Devices, Wired Siren [9155].
2. Select Enabled or Disabled.
48
görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın.
CommPact Installation Manual