System Trouble Tones - Electronics Line CommPact Installation Manual

Hata! Burada görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın. Hata! Burada
görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın.
8.5.4. Disarming Tones
To program tones sounded by the wireless siren on disarming:
1. From the Programming menu, select Tones, Disarm Tones, WL Siren [9341].
2. Select Enabled or Disabled.
To program tones sounded by the Built‐In Siren on disarming:
1. From the Programming menu, select Tones, Disarm Tones, Siren [9342].
2. Select Enabled or Disabled.
8.6.

System Trouble Tones

System trouble tones are sounded to provide an audible indication that a system trouble condition
exists. On hearing these tones the user is then able to determine which trouble condition is present
from the front panel keypad. For additional information, see p. 16, 3.5.1 System Trouble Tones.
8.6.1. Trouble Tones
The Trouble Tones option allows you to enable or disable audible trouble annunciation.
To program the Trouble Tones option:
1. From the Programming menu, select Tones, Trouble Tones [936].
2. Select Enabled or Disabled.
8.6.2. Telephone Trouble Tones
Most trouble tones are not sounded between 10:00pm and 7:00am so as not to disturb the user late
at night. Telephone trouble, however, may be an attempt to sabotage the system by cutting the
telephone wires. For this reason, you can program telephone trouble tones to sound at all times.
To program the Telephone Trouble Tones option:
1. From the Programming menu, select Tones, Tel. Trb. Tones [937].
2. Select Immediate or Delayed.
8.6.3. Fire Trouble Tones
The Fire Trouble Tones option is a feature designed to repeat fire‐related trouble tones until the
problem has been taken care of. If this feature is enabled, fire trouble tones will be repeated 3½
hours after the user has manually silenced the tones if the trouble condition has not been restored.
To program the Fire Trouble Tones option:
1. From the Programming menu, select Tones, Fire Trb. Tones [937].
2. Select Enabled or Disabled.
It is not possible to program the Telephone Trouble Tones and Fire Trouble Tones
options if the Trouble Tones option is programmed as disabled.
CommPact Installation Manual
51