Electronics Line CommPact Installation Manual page 66
Hide thumbs
Also See for CommPact:
- User manual (56 pages) ,
- Quick start installation manual (16 pages)
Table of Contents
Advertisement
Hata! Burada görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın. Hata! Burada
10.1.3. Communication Interface
For each account, you can choose whether the system employs PSTN, GSM, or GPRS
communication, provided that it is available in your control system configuration.
To program an account's communication interface:
1.
From the Programming menu, select Communications, Accounts [951].
2.
Select the account you want to program account (1‐6).
3.
From the account's sub‐menu, select Interface [#3].
4.
Select PSTN, GSM, or GPRS (GPRS is used only for the first account).
10.1.4. Two-Way Audio
The Two‐Way audio option determines whether Two‐Way Audio is enabled for the account. For
further information, see p. 36, 5.2.2 TWA Alarm Reporting.
To program the Two‐Way Audio option for an account:
1.
From the Programming menu, select Communications, Accounts [951].
2.
Select the account you want to program (1‐6).
3.
From the account's sub‐menu, select Two‐Way Audio [#4].
4.
Select Enabled or Disabled.
10.1.5. Account Number (Not Relevant for Voice Report)
To edit an account number:
1.
From the Programming menu, select Communications, Accounts [951].
2.
Select the account you want to program (1‐6).
3.
From the account's sub‐menu, select Account Number [#5].
4.
Enter up to eight digits. Enter leading zeros for account numbers of less than eight digits.
Use the
If the programmed protocol is Contact ID, ʺAʺ is not a valid entry in
the account number.
10.1.6. Call Attempts (Not Relevant for Voice Report)
The Call Attempts option determines the number of times the system tries to call a telephone
number before moving on to the next number in sequence.
To program the number of call attempts for an account:
1.
From the Programming menu, select Communications, Accounts [951].
2.
Select the account you want to program (1‐6).
3.
From the account's sub‐menu, select Call Attempts [#6].
4.
Enter a value between 01 and 15. Press ʹ√ʹ.
62
görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın.
key to enter hexadecimal digits. Press ʹ√'.
CommPact Installation Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the CommPact and is the answer not in the manual?
Questions and answers