Electronics Line CommPact Installation Manual page 70

Hata! Burada görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın. Hata! Burada
The following programming options relate to the method in which the Remote Programmer
software connects with the system.
Callback Telephone Number
RP Callback is a security feature that helps ensure that remote programming is only performed by
authorized personnel. When the Remote Programmer contacts the Control System, the Control
System hangs up and calls the Callback telephone number.
To edit the Callback telephone number:
1. From the Programming menu, select Communications, Remote Prog., Call‐Back # [9521].
2. Enter up to 16 digits. Use the
tone dialing), ʺPʺ (switch to pulse dialing) or ʺ+ʺ (international code). Use the
delete one character at a time. Press ʹ√ʹ when you have finished editing.
If there is no Callback telephone number programmed, RP Callback is disabled and the
system connects to the Remote Programmer software using the ʺdirect callʺ method.
RP Passcode
The RP passcode is a six‐digit code that grants access to remote programming. When establishing an
RP connection, the passcode programmed in the RP customer file on the PC must be identical to the
system's RP passcode.
To edit the RP passcode:
1. From the Programming menu, select Communications, Remote Prog., RP Passcode [9522].
2. Enter six digits, and then press ʹ√ʹ.
RP Communication Interface
For remote programming, the CommPact Control System can employ GPRS, GSM, or PSTN
communication, provided that it is available in your control system configuration.
To program the RP communication interface:
1. From the Programming menu, select Communications, Remote Prog., RP Interface
[9523].
2. Select PSTN or GSM (GPRS is relevant for the WEB RP only).
RP Access Options
Options are available to enable, disable or limit access to remote programming.
To program RP Access Options:
1. From the Programming menu, select Communications, Remote Prog., RP Access [9524].
2. Select an RP access option from the following table.
Table 10-1: RP Access Options
Access
option
Always
Enable
During
Disarm
Disable
66
görünmesini istediğiniz metne Heading 1 uygulamak için Giriş sekmesini kullanın.
key to enter ʺ*ʺ, ʺ#ʺ, ʺ,ʺ (pause), ʺTʺ (switch to DTMF
Description
Up/downloading is always possible.
The system must be disarmed in order to establish
a connection.
Up/downloading is disabled.
key to
CommPact Installation Manual