Select Boot Devices - IBM TotalStorage NAS Gateway 500 Service Manual

Select Task
SCSI 18200 MB Harddisk (loc=U0.1-Ethernet)
1. Information
2. Normal Mode Boot
3. Service Mode Boot
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
If either Normal Mode Boot or Service Mode Boot is selected, the next panel will prompt, Are you
sure?. If you answer yes, the device will be booted in the appropriate mode. If you answer no, the
firmware will return to the Select Task menu.

Select boot devices

Attention: Devices from which an operating system can be booted are displayed on the Select Boot
Devices menu.
Select this option to view and change the customized boot list, which is the sequence of devices read at
startup.
Configure Boot Device Order
1. Select 1st Boot Device
2. Select 2nd Boot Device
3. Select 3rd Boot Device
4. Select 4th Boot Device
5. Select 5th Boot Device
6. Display Current Setting
7. Restore Default Setting
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
When any of the options 1-5 is selected, the Select Device Type panel is displayed, which is similar to the
following example panel:
302
NAS Gateway 500 Service Guide
X = eXit System Management Services
X = eXit System Management Services