YES
Go to "Step 1240-12".
Step 1240-12
Have all the DIMMs in the quad located on the processor card been replaced?
NO
Go to "Step 1240-11" on page 56 to test the next DIMM of the quad on the processor card.
YES
Go to "Step 1240-13".
Step 1240-13
Did the processor originally have only one quad of DIMMs at the start of this map?
NO
Call service support.
YES
Replace the processor card. This ends the procedure. Enable memory repeat gard if necessary.
Go to "MAP 0410: Repair Checkout" on page 45.
Chapter 3. Maintenance Analysis Procedures (MAPs)
57